Parts & Accessories

Replacement Buckle 50 mm for Messenger Bags, Velocity, and other Backpacks.

Whether you're traveling by bike or foot, with the lightweight Carrying System your pannier can accompany you on both. When worn, the Carrying System ergonomically adjusts to your back, allowing air to circulate comfortably and keep sweat at bay. When not in use, the Carrying System can simply be rolled up lengthways and stowed inside your pannier without taking up much space. To attach the Carrying System to your pannier, hook the top loops into the pannier's Quick-Lock hooks, and snap the buckles into the base edge protectors of your bag. Additional load control belts even make bags with auxiliary fasteners easy to carry. - Compatible with all panniers with QL1, QL2 and QL2.1 and lower edge protection. - Handle - Small pack size - Minimal weight - Chest strap - Reflective thread on the straps

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

Elastic strap with lower hook for Vario hybrid packs. Provides additional support for heavy loads.

Elliptical rail for lower anchoring hook (incl. screws) and all models with QL2 including Classic Panniers from 2007+

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

If you like to use good old-fashioned maps on your bike tours, then the waterproof map case with roll-Velcro closure will be a welcome accessory for your Ortlieb Ultimate handlebar bag. Use the attachment set to attach your map case to your Ultimate bag in seconds. You can even turn and fold the map. And when you've reached your destination, you can continue to use the map to chart your course no matter what the weather. - Waterproof map case with cord fixing and roll Velcro closure - Attachable to handlebar bags Ultimate6 (4 point fixing with cord) - Transparent front and back made of tear and UV resistant PU-foil - Can be folded and used on both sides - Can be worn as map case around the neck e.g. for walking - Mapcase can be fixed with extra Velcro around bar stem - Not compatible with models Ultimate5 and older - Usable interior dimensions: 10.6 x 10.6 in (27 x 27 cm)

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

For all models with the QL1 system from 1993. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? The QL1 screw set will allow you to continue your tour with no loss of waterproof performance even if a screw goes missing. For all models with the QL1 system from 1993 Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? The QL1 screw set will allow you to continue your tour with no loss of waterproof performance even if a screw goes missing. DETAILS: - 5 screws - 5 flange nuts

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

Lock your panniers to your rack with Ortlieb's QL2 Anti-Theft Device. Simply mount the steel cables on your bags with the included hardware and then securely lock them in place.

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle

For Office-Bag, Commuter-Bag, Commuter-Bag Two. Worn, broken or lost QL2.1 mounting hooks? No problem! Simply replace the hooks with a new set of QL2.1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. DETAILS: - 2x QL2.1 hooks (16 mm) with adjustable handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm

For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL2.1 hooks (16 mm) with plastic handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm

You want a bicycle pannier with a simple QL3.1 system, but your bike rack isn't outfitted with QL3.1 studs? No problem! The Mounting-Set allows you to conveniently attach your QL3.1 pannier to virtually any commercially available bike rack with a tube diameter of up to 10 mm. Simply attach the QL3.1 Mounting-Set to your bike rack, and you-re off to your next destination! - 1 QL3.1 Mounting-Set, including mounting screws and inserts for bike-rack tube diameters of up to 10 mm

For all Office-Bag, Back-Roller and Sport-Roller models with Stealth buckles. Need to replace a pair of buckles? DETAILS: - 2 plastic Stealth buckles (25mm, black)

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

For all Ultimate 4 to Ultimate Six models, as well as the Barista, Velo-Pocket and Handlebar Basket Need to replace a lost or broken cable for your handlebar mount? - 1 wire cable (105 cm) with attachment screw

For all models with the QL2.1 system. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? No problem. The screw set will help you make sure you'll be able to continue your tour with no loss of waterproof performance even if a few screws go missing. DETAILS: - 10 screws - 10 nuts

Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers

For all models with the QL2.1 system. Replace a lost or worn semi-elliptical bracket with a new bracket. DETAILS: - 1 semi-elliptical bracket and mounting screws for the QL2.1 system

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

For all models with the QL1 or QL2 system. Missing or defective screws or nuts? Get this screw-and-nut set to conveniently replace any defective or missing screws. - 12 screws - 12 plastic nuts

For all Commuter-Bag, Commuter-Bag Two and Rack-Pack Urban models. Need to replace a lost or broken buckle? - 1 X-Lite plastic side-release buckle (25 mm, black)

For all Back-Roller and Sport-Roller models with the QL1 or QL2 mounting systems. Was the auxiliary closure strap for your Back Roller or Sport-Roller damaged during your last bike tour? This spare part allows you to get ready for your next tour. DETAILS: - 1 plastic support buckle (25 mm) - 1 set of replacement screws

For all Back-Roller and Sport-Roller models with the QL2.1 mounting system Was the auxiliary closure strap for your Back Roller or Sport-Roller damaged during your last bike tour? This spare part allows you to get ready for your next tour. DETAILS: - 1 plastic support buckle (25 mm) - 1 set of replacement screws

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle