Fenders

Axiom's Rackrunner Fender easily installs to your rear rack with the included hardware. Axiom reduced the impact of their manufacturing and shipping methods by designing the Rackrunner to fold flat. It's also made of strong, 100% recyclable plastic. The Rackrunner fits racks with or without platforms and can be trimmed to fit. A simple and elegant ‘instant fender’ add-on for pannier racks. - Virtually unbreakable polypropylene body - Mounts directly to rack tubing - 100% recyclable; can be trimmed to fit any rack; ships and merchandises as a flat sheet; hardware for mounting to racks with or without platforms

An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four

Ride in any weather The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount. Product details - Fully assembled fenders that install in minutes - Integrated rear Blendr light mount for use with Bontrager Flare lights - No-cut struts allow quick strut adjustment for proper tire clearance - Double-back strut on rear fender adds support and stability - Made of lightweight yet super-durable polycarbonate - Stainless steel hardware resists rust - Four sizes available to accommodate most bike and tire configurations

Genuine Brompton Mudflap & Fittings. These mudflaps prevent water and dirt from hitting your feet or spraying someone riding behind you and keeping your bike clean. The front mudflap is made from a lightweight, tearproof truck tarp and bolts onto the front mudguard where the mudguard stays. The rear is made from a garden flexible rubber and screws onto the mudguard using the supplied nut and bolt. - Genuine Brompton replacement part - Front mudflat & fittings - Keeps your feet getting wet and your bike getting dirty - Easy to install - Fits all-generation Brompton mudguards

- Genuine Brompton replacement part - Front and rear mudflats & fittings - Keeps your feet getting wet and your bike getting dirty - Easy to install - Fits all generation Brompton mudguards

Discover our Brompton Front Mudguard Blade in Black, a necessary Brompton accessory all year round, and offers even better protection due to a larger flap. This Mudguard Blade is essential for your Brompton to keep you moving smoothly, safely, and in style. Available in sleek black, it attaches to the front of any Brompton frame and adds to the modern look of the bike. The Brompton Front Mudguard Blade does an excellent job at preventing mud from spraying into your face, hands, and clothing so you can hop off your bike at your destination and feel fresh, even on rainy and muddy days. The Black Mudguard Blade includes the flap, which is designed to keep dirt off your feet and bike, too. With our Brompton Front Mudguard Blade in Black, you make the rules, not the weather, so you can ride any time. - Weight: From 1.94 kg - Color: Black - Fitment: Not compatible with the roller rack version - Compatibility: ACP Lines - Note: No fitting parts included

Genuine Brompton Mudguard Blade & Mud Flaps. Constructed from Chromoplastic which is made by sandwiching Aluminum strips inside a plastic housing resulting in a stiff and sturdy mudguard that will keep you dry and won't break. The front is made from tear-proof lightweight truck tarp and the the rear is made from flexible rubber to keep you and your feet dry. - Rear Mudguard Blade - R version - Flap included

Constructed from Chromoplastic which is made by sandwiching Aluminum strips inside a plastic housing resulting in a stiff and sturdy mudguard that will keep you dry and won't break - Rear Mudguard Blade - L version - Silver - Flap included

Genuine Brompton Mudguard Stay Sets keep your mudguards secure. - Front includes the axle hook and anchor plate - Rear includes the roller assembly and anchor plate - Version R Bikes: One needed for the front - Version L Bikes: Two needed. One front, one rear - Steel Weight - Front: 69g Rear: 140g

The new Brompton Front and Rear Flexi-mudguards. 75-gram weather protection, front and back. Durable, lightweight, reusable. The Brompton Mudguard Set folds with your bike like tough origami. From first handmade prototype to testing with customers across the board, Brompton engineers made sure the new Front and Rear Flexi-Mudguards do exactly what they need to. Durable, lightweight and reusable weather protection that you can fit yourself. The mudguard set comes with instructions, frame protection stickers and cable ties, including spares for re-attachment. - Compatibility: Fits on all Brompton A Line and Brompton C Line Models - Flexibility: Flexibility to use in wet season and remove in dry - Fitting: Install them yourself with a pair of household scissors (not supplied)

Functional. Fashionable. Fenders. Keep you and your threads clean and dry by adding stylish fenders. Accessorize your ride and keep yourself dry. - Front and rear full-length fenders designed for use on Townie 26-inch bicycles - Fits both Step-Thru and Step-Over Townie Original models - Compatible with tires up to 2.0-inch wide - Protects against pesky mud and splashes

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Fenders intended for warranty and service use. - Original replacement fenders for Electra Townie bikes - Color matched for direct compatibility

- Made of resistant chromoplastic - Stainless steel bracket and stays - Pre-assembled for fast and easy installation - Extra long mudflaps provide ultimate coverage

The new EVO fender was designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression. The EVO Ziptie fender attaches directly to the fork with the supplied zipties. Compatible with most forks other than models with reverse arch. - Total length: 515mm (Rr extension 330mm, Fr extension 185mm) - More mud clearance - No more crown fouling at full compression - Stiffer, optimum length, not too short, no longer than needed - Designed and made in the UK from recycled PP - Strong enough for DH racing at the highest level - 120g

Following the tried and tested tire hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos. To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave on at all times. - Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and nitrile O-rings - Length: 490mm - Width: 60mm - Weight: 75g

Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and designed for tires up to 50mm wide. The Rear GravelHugger is designed to be attached to the bike with zipties as these afford the most secure way to fitting. However it can also be attached utilising hook and loop straps (sold separately), making removing and refitting easier. - Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination) - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and zipties - Length: 560mm - Width: 55mm - Weight: 200g

The new EVO fender was designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression. The EVO Ziptie fender attaches directly to the fork with the supplied zip-ties. Compatible with most forks other than models with reverse arch. - Total length: 515mm (Rr extension 330mm, Fr extension 185mm) - More mud clearance - No more crown fouling at full compression - Stiffer, optimum length, not too short, no longer than needed - Designed and made in the UK from recycled PP - Strong enough for DH racing at the highest level - 120g

- Fits tubes from Ø27 to 35mm - Fits 20" to 24" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - Mounting kit included

Stay dry even when riding in the wet with the Flap Guard. Wet weather defense. This super lightweight and discreet mudguard protects your face and fork seals from mud and water when hitting the trails. Made of super soft material the Flap Guard fits to 26", 27.5" and 29" bikes and is compatible with most forks. - Installs on fork bridge and fork legs with included zip ties - Designed for tire widths 1.95" - 2.7" - 317mm (12.6") for maximum protection - Also compatible on rear side of frame - Weight: 45g - Compatible Tire Size: Universal - Mounting Location: Fork / Seatstay - Material: Plastic

The MudRocker rear fender is the best solution for keeping your backside dry and comfortable on your next wet ride. The MudRocker rear fender perfectly deflects dirt and water spray from your rear wheel and integrates into the rear triangle of your bike to form a seamless single unit. Suitable for full suspension and mountain bikes, the MudRocker rear fender attaches to the seat stays of your bike with adjustable rubberized hook and loop fasteners. With an additional extender that can insert and slide towards the seat tube, you'll ride protected. - Hook & loop fasteners with wedge-shaped pads offer adjustable height and fitment - Includes rear fender extender and seat tube extension for maximum coverage - Includes frame protection film to prevent scratching - Length: 840mm - Compatible Tire Size: 27.5 and 29" - Mounting Location: Rear - Attachment: Clip-on - Material: Plastic - Weight: 172g

• Superlight extra-long mud flaps give additional spray protection • Double hinged quick release fitting system fits aero forks and is compatible with disc brakes • Can be adapted to the radius of the wheel by adjusting the length of the stays • Paintwork protection film for the frame and fork is included

• Intended for tires at least 32mm wide • Mud breaker built into front fender • Telescoping rear fender offers more coverage near seat tube • Versatile rubber fasteners • Anodized aluminum stays feature a wider design for tire clearance • 42mm max tire width • Not compatible with rim brake frames

The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler

Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.

The S-BLADE can be fitted on virtually any road bike and the angle setting optimally adjusted. Wet weather defense. The S-BLADE is the little brother to the top-selling X-TRA-DRY and is designed for the ambitious racing cyclist riding narrower tires. - Quick release fender for road bikes - Designed for tires up to 35mm wide - Angle easily adjusted for optimal protection - Lightweight at 117g - Compatible Tire Size: 700c - Mounting Location: Seatpost - Attachment: Quick Release - Material: Plastic

It is the ideal companion for the S-BLADE rear mudguard.

Wet weather defense The ShockBlade II is a high-quality front fender designed for use on bikes with suspension forks. With an extra wide blade platform and extending both forward and behind the fork, the ShockBlade II will protect your face and upper body from spray. Product details - Designed for use on front suspension fork - Extra wide blade for extended coverage - Quick release design attaches at fork crown - Includes cone adapters for steerer tube inner diameters 15-35mm - Dual compound edges for extended coverage and durability

The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible

The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible

The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible