Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bottles/Cages

Bontrager Race XXX Lite Cage
$99.99
This high-tech, full-carbon cage is the perfect upgrade for your race-ready rocket. Bontrager's Race XXX Lite Cage offers exceptional bottle grip with virtually no weight addition. Plus, these sleek bottle binders add top-end trim that enhances the look of any bike.
Profile Design Aero HC Bottle
$75.99
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
Serfas Tubular Carbon Bottle Cage
$59.99
• Super lightweight carbon construction • Tubular carbon rails for a sleek look • Special rubber grommet secures all water bottles • Weight: 21 grams +/-
Eclypse Racer X Bottle Cage
$27.99
- Ultra light aluminum construction - Rubber connection keeps bottle firmly in place yet allows ease of operation
Serfas Starfighter Nylon Cage
$17.99
Made of a lightweight nylon composite, Serfas’ Starfighter Nylon Cage works with road and mountain bikes to hold your bottle in place and allow for easy removal.
Profile Design Aqualite
$33.99
Stay aero and stay hydrated with Profile's Aqualite! Featuring an easy-to-refill, no-splash cap, this durable, injection-molded 22-ounce bottle includes an extended straw for easy access. And, the Aqualite fits both wide and narrow-mounted aerobars easily with Profile's Aerodrink bracket (sold separately).
Profile Design Kage
$12.99
Profile's Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded nylon/fiberglass construction is incredibly strong and light, too!
Pro Bottle Cage Carbon
$84.99
- Full UD Carbon cage - Bolts included - Rigid clamping - Lightweight - Fits 74mm bottles
Kinetic Twenty20 Bottle Cage
$19.99
The Kinetic Twenty20 Bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees off-center. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right, allowing bottle insertion into the center of the cage, rather than in from the side.
Trek Water Bottle Santa Cruz
$9.99 - $10.99
Key features: - All new cap and bottle design for great feel and consistent closure - 100% FDA approved biodegradable plastic - BPA and BPS free - Triple-seal cap provides leak-proof functionality - Soft thermoplastic poppet is easy to open and close - Wide mouth for easy addition of powdered drinks or ice cubes - 2 sizes available : 21oz and 26oz - Manufactured in the USA
Bontrager Storage Bottle
$8.99
Storage made simple Pack the essentials for every ride with the Bontrager Storage Bottle. It features secure storage for multi-tool, tubes, tire lever, CO2, and patch kit that easily fits in any standard water bottle cage. Key features - Wide opening for easy access - Fits in standard water bottle cages - Securely holds tools, CO2, spare tube, tire levers and more
Delta Ultimate Beverage Holder
$10.49
- Expanding cup holder grips most beverage sizes - Patent pending rubber strap tensions and grips cup - Handlebar clamp adjusts to fit any bar thickness up to 35mm diameter - Stainless steel hardware
Profile Design Universal Aerodrink Bracket
$23.99
The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).
Profile Design FC25 Drink System
$159.99 - $169.99
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
Portland Design Works Sparrow Cage
$24.99
The Portland Design Works Sparrow Cage is made from a single sheet of lightweight 5052 alloy. The Sparrow's wings fold in to securely cradle your water bottle and the cut outs help keep the cage light. Get a Sparrow and make your ride fly. - Constructed of 5052 alloy - Includes two stainless bolts for installation  - Weight: 57 g (2 oz) - Lifetime PDWarranty
Profile Design Aqua Cell
$46.99
With Profile's Aqua Cell, your favorite drinks are just a straw sip away! This durable, injection-molded system features two chambers so you can optimize your hydration with multiple drinks. The main chamber holds 35 ounces and the secondary chamber holds 15 ounces. And, the top caps open easily for on-the-go refills. The Aqua Cell also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Look Carbon Bottle Cage
$99.99
It's the perfect finishing touch for your super-light carbon bicycle: Look's Carbon Bottle Cage. It's made of carbon and weighs a scant 24 grams. This beautiful cage holds bottles securely over even the bumpiest roads with the help of rubber grippers on the inside.
Profile Design Aero HC Bracket Kit
$65.99
The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.
Profile Design RMP Saddle Mount Water Bottle Cage
$127.99
This rear mount hydration system mounts to standard 7mm saddle rails and sits flush to rear of saddle. Featuring an innovative elliptical arch clamp for tilt adjustability. - 14" adjustment for case to glide under saddles with a transition tab - Precision machined stamped 6061-T6 construction - Capacity to hold one (included) or two Profile Design Vise Kages - Weight: 200g
Profile Design Side Axis Kage
$21.99
The ideal cage for tight frame designs and BTA mounts. The cage body can be flipped for either right side or left side removal. - Easy load design for compact frames - Side-loader design makes this cage ideal for small frames that leave little room for removing bottles in the typical forward and up motion. Suitable for both road and mountain use. - BTA Mount Optimized: The cage is optimized for BTA (between the arms) bottle mounts where the natural motion is to pull the bottle sideways. Specs - Construction: Injected Nylon/Glass Fiber - Weight: 52g
Lezyne Road Drive Cage Carbon
$85.99
Lezyne's Road Drive Carbon Cage is a lightweight cage made of FCT carbon fiber with optimized architecture for accommodating a wide range of bottle shapes and sizes. The strong cage ribs, top catch and bottom bridge are designed to increase cage strength and grip, preventing bottles from ejecting. A pump bracket is integrated into the cage body. With the included Velcro strap, a Road Drive pump can be held securely in place. The low profile design and ovalized mounting holes allow this cage to fit on both small and large frames.
Profile Design Vise Kage
$22.99
The Vise Kage is a rear mounted firm-hold bottle retaining system to smooth airflow in the aero position. Recommended for Profile Design rear-mount systems. - Nylon Glass Fiber non-marking construction - Weight: 27g
Profile Design FC35 Drink System
$179.99
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
Portland Design Works Owl Cage
$24.99
The Portland Design Works Owl Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Great Horned Owl, its wings fold in to securely cradle your water bottle. Get an Owl and make your ride fly. - Constructed of 5052 alloy - Weight: 67 g (2.3 oz) - Includes two stainless bolts for installation - Lifetime PDWarranty
Lezyne Power Cage
$14.99
Lezyne's Power Cage is made from hollow aluminum for strength and reliability. And, its wraparound design holds your bottles securely over the rough stuff and allows for easy in/out.
Profile Design Aero HC Drink System
$128.99
Profile Design's Aero HC Hydration System sports a sleek, aerodynamic design so you can stay hydrated and hidden from the wind. The bottle features an aerodynamic design and a removable nose so you can easily clean it.The integrated mount places your computer right where you can see it when you're in an aero tuck. With 35mm of width adjustment and independent fore/aft adjustment for the bottle cage, the Aero HC Hydration System is a key part on your aero bike.
Profile Design Aerodrink System
$41.99
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Lezyne CNC Cage
$39.99
Lezyne's CNC Cage is CNC-machined out of aluminum for strength and reliability. Its wraparound design holds your bottles securely over the rough stuff and allows for easy in/out.
Portland Design Works Bar-ista Coffee Cup Holder
$22.49
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
Profile Design B-Tab
$59.99
The B-Tab is a low-profile horizontally-mounted BTA (between the arms) system. It features the versatile Side Axis Kage which allows riders to choose either a left or right side bottle release. The system can support both standard water bottles and the Aero HC. Alternatively, the system can be rotated to mount a standard bottle vertically. A hinged bracket design allows for quick and easy install and removal. - Can be rotated to mount vertically - Compatible with 31.8mm basebar - Offset design provides fore/aft adjustment - Hinged bracket design for quick installation and removal - 10mm wide bracket
Tacx Radar
$24.99
The Radar is a side load bottle cage with very good clamping, specifically designed to fit small bike frames. You insert and remove the bottle sideways from either side, depending on how you mount the cage. The body of the Radar is made from a strong glass fiber compound. Tacx increased its clamping force even further by giving it a round shape with extra ribs.
Topeak Modula Cage II
$14.99
Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.
Profile Design Aerodrink Base Bar Bracket
$33.99
Profile Design's Aerodrink Base Bar Bracket is the perfect holder for your Profile Aerodrink bottle. It weighs next to nothing and is built tough to firmly hold bottles and last for years of training and racing. It attaches quickly and easily to all Profile, and most other base handlebars (base bars and bottles sold separately).
Zipp Alumina Bottle Cage
$49.99
Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams
Polar Bottle Zipstream Breakaway
$17.99
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. - ZipStream cap features self-sealing valve - Removable CarryLoop and drinking valve for easy cleaning - Wide mouth for easy cleaning and ice cubes - Lightweight and easy to squeeze - Dishwasher and freezer safe - Phthalate and BPA free. - Double wall insulated – keeps water cold twice as long - Made in USA - Fits standard bike cages and most cup holders - Backed by a lifetime guarantee and free replacement caps
Zipp Vuka Alumina BTA Mount w/QuickView
$94.00
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
Bontrager Handlebar Bottle Cage Mount
$5.99
Keep your water bottle within easy reach with Bontrager's Handlebar Bottle Cage Mount, which clamps to standard cruiser and flat handlebars and allows you to add a bottle cage to the front of your bike. • Handlebar-mounted cages get the water bottle up close and personal • Clamp only (cage sold separately) • Fits both 22.2mm and 25.4mm bars • Aluminum
Evo Trego Bottle Cage
$15.99
- Side entry style bottle cage is ideal for smaller frames - Composite material - Reversible design
Bontrager Bat Cage
$14.99
Bontrager's Bat Cage is light, holds your water bottles (sold separately) firmly without marking them up, and has been ridden to victory in all three Grand Tours! It's ready to work for you too!
Previous page Page 2 of 2