Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.
The HCW-16.2 is a combination 15mm pedal wrench and a chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip is compatible with 5–12 speed cassettes. The HCW-16 is 10.75" long (27.3cm).
Park adds versatility to your toolbox with their combination Chain Whip/Pedal Wrench. It features a chain whip for cassette removal on one end and a 15mm pedal wrench for installing and removing pedals on the other.
Designed for dry to mixed conditions, Go! is an advanced biodegradable vegetable/synthetic blend engineered to provide superior efficiency, wear protection, and durability with a lower viscosity which attracts less dirt. The sustainable vegetable oil associates ionically with metal surfaces creating a resilient protective barrier for added life and increased anti-wear properties. Additionally, Go! features detergent properties which actively dissolve and isolate dirt as you ride. Great for lubrication of parts too!
- Easy to use tool for checking chain wear
- POM Tire Levers - Set of 3 pieces. - Unique V shaped design can be easily fixed on the spokes. - Air vent function added on back. - Smart V shaped design on back is a fulcrum on the rim for tire removal
Park's Vulcanizing Patch Kit includes 2x 20mm round patches and 2x 25mm round patches for small holes, and 2x 35x25mm oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
$3.99 - $5.19
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
- Tire Lever Set (3 pcs) - Zinc-plated steel
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt
Double-ended to fit most slotted-type nuts, the other side is the tool to remove the dust cap out of the cranks, using a hex key you can easily install/remove the chaining bolts.
- Forged 8 groove spoke wrench - For spoke tension adjustment on 10G-15G nipples
The ideal trail-side repair kit. - Contains 6 patches, 1 metal buffer, 2 tire levers and 1 tube of rubber cement
- For removal of tires from rims - High-strength ABS plastic
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
$5.99 - $6.99
TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger
Hub cone wrenches available in various sizes
- High grade steel screwdriver - Ergonomically-designed grip
3 specially designed tire levers to install, remove and clean up tubular tire setups. Black lever shaped to help remove glue from rim. Orange levers shaped to help with safe removal and installation of tires.
$6.00 - $49.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
Removes SunTour® 2-notch freewheels. Not recommended for SunTour® four to six notch freewheels. Use with 23mm wrench. TB-1035 can be turned with TB-8830.
Heat treated and made to last. For 3.2, 3.3, and 3.5mm nipples.
$6.49 - $10.99
Various spoke wrenches for differing spoke sizes and companies.
• Lightweight reinforced nylon construction • Smooth edges won't scratch rims or pinch tubes • Storage clip features built-in abrasive surface
- Replacement breaker pin for chain drive - 9/10 speed only
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Page 1 of 26 Next page