Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.
Park's TS-2.2 Professional Truing Stand has been a staple in bike shops for decades because it's so reliable and easy to use. It accepts all common wheel diameters up to 29 inches with and without tires. It’s made of heavy chrome-plated steel with nylon bushings at pivot points and can be bench-mounted, vise-held or attached to Park's Tilting Base (sold separately). The best feature is that this stand automatically centers rims over the hubs, which saves time repairing and building wheels. Also, installing the wheel and positioning the caliper for truing is quick and easy thanks to the stand's separate knobs for each setting. This is an awesome truing stand that will last a lifetime.
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings. Includes damper, syringe, and suspension fluid.
Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.
The BX-2.2 features updated pallet configuration and storage options to help you keep your tools secure and easily accessible. The expanded custom designed tool pallets, including dual-sided pallet wings, are all housed in a virtually indestructible composite travel case. Designed and built for the traveling mechanic who demands the best! - Custom designed tool-holding pallets with loops and pockets - Folding, dual-sided pallet wings - Front tool pallet that stores securely inside during transport - Dent-proof composite shell built around an aluminum frame - Key lock - Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg)
Park Tool put together this set of over 40 of their best tools to do basic maintenance and cleaning tasks as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop quality bicycle tools. The AK-4 includes a tough toolbox to protect your investment. Kit Includes: - ATD-1.2 Adjustable Torque Driver - BO-2 Bottle Opener - CC-4 Chain Checker - CM-5.2 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - FR-5.2 Cassette Lockring Tool - GP-2 Pre-Glued Super Patch Kit - GSC-1 GearClean Brush - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - PW-5 Home Mechanic Pedal Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SR-12.2 Sprocket Remover / Chain Whip: 5 to 12-Speed Compatible - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TB-2 Emergency Tire Boots - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool
Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.
Pedro's Tool Station includes 13 professional-quality Pedro's tools covering a wide array of common repairs and adjustments. Designed for public use, all tools are permanently tethered to the steel back panel with extra-long stainless steel cables. The tools are stored in our Burrito Tool Wrap with a protective weather-resistant flap. Three spare cables and crimp sets are included and can be used to add extra tools, a floor pump, or to facilitate replacement of tools if necessary. The Tool Station also features 4 mounting holes which are keyhole shaped to allow easy removal and re-installation if desired. Additionally, the central mounting holes are spaced to fit standard steel sign posts if a free-standing setup is preferred. - 6-Pack Chain Tool - Chain Tool and three-way spoke wrench (includes 2 Spare Pin/Screws) - Folding Hex Wrench Set - 1.5-6mm sizes - Pro T/L Hex Wrench - 8mm - Y Wrench-T10,T25,T30 sizes - Tire Levers - Yellow Pair - Pro Pedal Wrench - #2 Phillips Screwdriver - 5.5mm Flat Blade Screwdriver - Toothbrush - Drivetrain brush Chain Checker Plus - Chain wear check tool, chain hook tool, and chainring nut wrench - Adjustable Wrench-10" - Trixie - 8, 9, 10, 15mm Box, Bottle, Cog Lockring
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.
Park Tool's Powder Coated Professional Wheel Truing Stand has all the same features of Park's world famous, chrome plated TS-2.2 truing stand in a more economical, powder-coated version. • Uprights accept wheels up to 29” with or without tire • Tall, accurate calipers accept rim widths up to 4” • Accepts hub widths up to 175mm • Powder-coated heavy gauge steel • Strong, comfortable knobs • Removable/replaceable composite caliper tips protect painted rims • Uprights move simultaneously to accommodate front and rear wheels • Spring-loaded calipers and caliper arm prevent binding • Smooth, accurate operation
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.
Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.
- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life
Inspired by Pedro's unrivaled MTK, the new Apprentice Tool Kit offers 22 handpicked professional tools enclosed in a high quality, blow-molded hard case. This ultra-portable tool kit leverages the versatility of Pedro's hand tools to provide 32 functions covering an impressive range of installations and repairs, making it perfect for the professional or enthusiast. Each tool has its own custom-designed location cut into durable EVA foam, keeping the kit organized and your tools easy to find. Designed for easy transport and efficient storage, the Apprentice Tool Kit is perfect for the car, taking to events, or a minimalist home shop setup. Tool List - 7pc L Hex Set w/ Holder: 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes - 8mm L Hex - Y-Torx, T10,T25,T30 - Tire Lever Pair - Yellow - Splined Bottom Bracket Socket - Cassette Lockring Socket - Bottom Bracket Wrench - Phillips #2 Screwdriver - Flat 5.5mm Screwdriver - Universal Crank Puller - Equalizer Pedal Wrench w/ 24mm Socket - Six-Pack Chain Tool with Spoke Wrenches (3.2, 3.3 and 3.5mm) - Cable Cutter - Cog Wrench - Toothbrush
The Pro Elite Bike Repair Stand is the premier portable and home service partner for the most demanding bike mechanics. Its lightweight, compact, and durable design delivers unmatched stability, adjustability and portability. The patented ratchet-action closure and speed release clamp is capable of managing any bike frame, up to 85lbs (39kg) and tube diameter up to 2.6? (6.6cm). Be the most popular rider at the trailhead or in your neighborhood with the Pro-Elite Bike Repair Stand. Add a Wheel Truing Station, Bottle Opener and Team Edition Tool Kit for the ultimate service setup.
Ever wonder why so many Tour de France and professional mechanics rely on dropout-style wash and work stands? It’s because they can adapt to virtually any bike quickly and easily, offer a rotating platform, and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. The compact and portable design accommodates almost any frame and it’s stable platform and durable construction is ready to take your bike maintenance to the next level.
$233.99 - $399.99
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately). • 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate • Approximately 68 lbs (31k) • Black painted
- (2) Crank tools - (2) Double-ended wrenches - (1) Chain whip - (1) Master-link pliers - (1) Freewheel tool - (1) Cable cutters - (1) BB Tools - (2) Screwdrivers (-/+) - (1) Pedal wrench - (3) Tire levers - (1) Chain to
- Aluminum tripod base - Includes 6 wheel hangers
With the Spider Prof repair stand you can easily perform the toughest repairs or lighter work such as adjusting and cleaning. - Anodized aluminum tubes are lightweight and resistant to detergents - Triangular profile means dirt is less likely to adhere to the surface - The integrated tool surface is height adjustable and can rotate 360-degrees - Compact when folded and easy to carry - Weight: 14 lbs - Maximum load: 44 lbs
This is Wheels Manufacturing's new toolkit for installing, removing, and servicing Wheels Manufacturing bottom brackets. The kit includes their new bottom bracket socket tools for installing and removing Wheels Mfg. BB cups with the following spline patterns: 48.5mm 16-notch, 44mm 16-notch (may be compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ and FSA). It also includes sealed bearing extractors for 22mm, 24mm, and 30mm ID bearings. Includes - T-Handles with 1/2" threaded rod - (2) Universal bottom bracket drift (BB-OB) - (1) 48.5mm/44mm, 16-notch Bottom Bracket Socket - (1) 48.5mm, 16-notch Single Sided BB Socket - (1) 30mm ID sealed bearing extractor - (1) 24mm ID sealed bearing extractor - (1) 22mm ID sealed bearing extractor - (1) receiver cup - (1) 44mm receiver cup sleeve - (1) 42mm receiver cup sleeve - (1) 39mm receiver cup sleeve - (1) bearing pusher shaft - (1) 3/8" to 1/2" square drive adapter - Wood base
Don't monkey around. Wrench with precision! Topeak's PrepStand Pro boasts an integrated digital scale so you can weigh your bike after an upgrade, or the components you plan to install. Of course, you'll love working on the PrepStand Pro, too. Its heavy-duty aluminum base is extra stable for heavy work; its clamp safely and securely grips all seatposts; it also rotates 360 degrees for placing bikes just where you want them. Plus, it only weighs 13.7 pounds and folds into the included nylon carrying bag for easy transport.
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
- Aluminum construction - Precision dial gauge for professional accuracy - Can be used with all spoke types
- Installs 16 bearing sizes including 3 different bottom bracket bearings: 2437, 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904 - Includes T-handles with Acme threaded rods, wood base with dowels for holding adapters, 16 bearing installation drifts, 3 "speed spacers" and 2 linkage offsets for full suspension bearing installation - Made in the USA
Features: - Velcro fastener secures frame to bottom bracket cradle. - Plastic bottom bracket cradle won’t harm bike’s finish. - Carry bag, tool tray and wheel hook are included. - Very easy to open, stable tripod base folds for storage. - Ideal for heavy-duty work.