Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

Maxima Chain Pro Dry Formula Lube
$15.99
- Ultra-Clean, waterproof formula chain lube designed for use in dry conditions - Surface active chemistry promotes smooth shifting under load, quiets chain noise and significantly improves life of drivetrain - Fast penetration and setup promotes a clean, trouble-free operating environment in dry, dusty conditions
Zipp Tangente Tube Wrench
$9.99
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Boeshield T-9 Lubricant
$14.99 - $35.32
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
Crank Brothers m19
$43.00
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
Feedback Sports Pro-Elite Repair Stand w/Tote Bag
$416.99
The Pro Elite Bike Repair Stand is the premier portable and home service partner for the most demanding bike mechanics. Its lightweight, compact, and durable design delivers unmatched stability, adjustability and portability. The patented ratchet-action closure and speed release clamp is capable of managing any bike frame, up to 85lbs (39kg) and tube diameter up to 2.6? (6.6cm). Be the most popular rider at the trailhead or in your neighborhood with the Pro-Elite Bike Repair Stand. Add a Tool Tray, Wheel Truing Station and a Bottle Opener for the ultimate bike repair stand setup.
Park Tool Crank Puller (Square Taper)
$20.99
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
Bontrager Bike Wash
$17.99
A high-performance bike wash that’s designed to clean your bicycle gently and effectively to keep it looking its best. So fresh and so clean Superior dirt-lifting and cleaning abilities make Bontrager's Bike Wash the easiest and most effective way to clean your bike. It's formulated specifically for bicycles, so you can save your dish soap for the dishes and your shampoo for the shower. Product details - High-performance bike wash designed for all bikes and all paint finishes - Proprietary formula is Trek's factory-recommended bike wash - Also great for cleaning wheels, tires, and shoes - Pleasing cherry scent - Spray directly on bike, wait to allow it to soak, and clean with soft brush - 32 fl oz (946mL) spray bottle is easy to use and refillable with diluted Bontrager Degreaser - Keep out of reach of children and do not ingest
Bontrager Tire Levers
$4.99
Bontrager's Tire Levers handle the toughest tire-and-rim combinations. Their specially designed tips engage the tire bead so it can be removed with just two levers. Plus, these beefy, high-strength plastic levers fit your hands great for superior leverage.
Crank Brothers m17
$39.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
Park Tool Gear Clean Brush
$8.19
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Bontrager BITS Integrated MTB Tool
$117.99
Securely stow a multi-tool, chain breaker, and master link in your fork’s steerer tube for quick and easy access when you need it. Securely stow your essential trail toolkit in your fork’s steerer tube with this clever integrated storage solution. The compression fitting replaces a traditional MTB fork's star nut and keeps an included multi-tool and more cleanly out of sight, yet always at the ready—and it doesn't require you to thread your fork! Product details - Easy tool access for quick trailside repairs - Bolted compression system securely holds tool and carrier - Compression install replaces the star nut fitting with no need to thread fork - Simple install with two bolt lengths and included spacers for customizing fit - Includes BITS Multi-Tool with hex keys, screwdriver, chain breaker, and storage for quick links - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Compatible with MTB forks with threadless headsets and non-carbon steerer tubes - Not compatible on forks with oval internal steerer tube shapes like the Fox 38
Park Tool Home Mechanic Pedal Wrench
$19.99
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Park Tool Benchtop Overhaul Mat
$51.39
A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation. • Made of a rubber-like PVC • Cleans easily and looks great on any bench • Measures: 14.7” x 7” (38cm x 18cm)
Topeak Nano Torqbar
$48.99
The Nano TorqBar is the slimmest preset torque wrench available, but don’t let its size deceive you. It is a precision-crafted, high quality tool for either the home mechanic, professional bike shop, or your own jersey pocket. Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. Includes preset TorqBit and the 5 most popular tool bits (3/4/5mm hex & T20/T25 Torx).
RockShox BoXXer Solo Air Upgrade Kit
$245.99
Upgrade your BoXXer with RockShox's Solo Air spring with revised spring curve and air spring tunability with Bottomless Tokens (4 included in package). This kit is compatible with BoXXer World Cup forks from 2011 to 2014 (serial number later than 16T11XXXXXXX).
Quarq 8-Bolt Interface Tool
$44.99
- Torx Tool Wrench 4Nm Preset
IceToolz Hex Key Wrench Set
$10.00
- Hex Key Wrench Set - Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end
IceToolz Disc Brake Piston And Pad Alignment Tool
$32.50
- Disc Brake Piston and Pad Alignment Tool - Reposition pistons or help align disc pads with this easy to use tool.  - It's made of Cr-Mo steel with a comfortable and oversize rubber handle for a great grip.
IceToolz Crank Tool with Handle
$22.50
- JIS/ISIS/Octalink crank tool with durable handle
IceToolz Ocarina Torque Wrench Set
$40.50
- Ocarina Torque Wrench Set It's lightweight and smart design. - Tightening force to the correct torque easily, no need to set up the tool between various torque, for 3~10N?m rating. - The ergonomic handle holds 3/4/5/6mm hex keys and T-25 in one tool. - Ideal for all mechanics and avid riders.
Super B Work Stand Replacement Rubber Clamps
$9.99
- Made of environmentally friendly plastic, TPR. - Spare part for Super B work stands: TB-WS20, TB-WS460, TB-WS30.
IceToolz Double-Ended Spoke Wrench
$10.30 - $12.00
- Black: Spoke wrenchfor 3.20mm/80 ga./0.127" Nipple - Red: Spoke Wrench for 3.45mm/80 ga./0.136" Nipple - Silver: spoke Wrench for 12G-13G Nipples..
Topeak Tool Tray
$38.99
The Topeak Tool Tray keeps tools and small parts close at hand for maximum convenience. And, it rotates for optimum accessibility, too.
Super B 1/2-inch Driver Bit Socket H10
$4.99
1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt
Super B Work Stand Replacement Knob
$9.99
Spare part for all Super B work stands.
RockShox Speed Lube Kit
$76.99
- Aids in the quick change of oil-bath fluid in RockShox Totem forks and for servicing/bleeding XX-Series Xloc hydraulic remote systems (Not for reverb seatposts) - Includes: Speed lube syringe+hose, adapter fittings/O-rings, And port-access wrench
Pedro's Green Fizz 16X Concentrate
$15.99
The Green Fizz bike wash safely, naturally, & effectively removes tough dirt & grime from the whole bike. Developed specifically for bicycle washing, Green Fizz can safely be used on any material without risk of damage or washing away grease/lube from critical parts. The pre-activated, biodegradable formula uses advanced plant-derived surfactants and incredible foaming action to reach surfaces and loosen dirt, allowing it to be easily wiped or rinsed away, leaving your bike looking like new. Free of harsh chemicals, gentle enough to use on any material, fully biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC. 16X concentrate options replace ready-to-use gallons and offer great value, reduction in packaging, and reduced shipping costs. - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike - Use on the whole bike without risk of damage or washing away grease/lube from critical parts - Safe, biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC
Wheels Manufacturing Inc. Sealed Bearing Extractor 30mm
$33.99
Wheels Manufacturing Sealed Bearing Extractor - 30mm Fits: - 6806 - Other bearings with an inside diameter of 30mm
Wheels Manufacturing Inc. Open Bore Adapters
$10.99 - $11.00
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
Super B Campagnolo Bearing Puller And Installation Set
$83.99
- Specialy designed tools to safely remove/install crank bearings without using a hammer
Super B Wheel Alignment Gauge
$59.99
It is used to center the rim between the locknuts of the hub to insure that a wheel will perform properly. To make precision adjustments, a wheel alignment gauge is a very important tool. It allows simple checking of the central alignment of road, MTB, and BMX wheelsets from 20” to 29”. It works with most widths and could be used with the tire on the wheel.
Super B Oversized Tube Cutting Guide
$29.99
- Guides a hacksaw to cut airfoil shaped seat posts up to 68mm or round tubes from 1" to 1.375" in diameter
Super B Crank Installation Tool
$2.99
For Shimano and Truvativ cranks. Use with a 6mm hex key.
Super B Dead Blow Hammer
$32.99
- Shockless and no rebound - Steel structure and includes steel shot
Super B Tube Cutter
$74.99
- Comes with spare blade - For 6-38mm tubes (.25"-1.5")
Super B Professional Cable Cutter (WC30)
$44.99
- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps
Super B Crown Race Remover
$43.99
- For 1.25" fork - Universal design to quickly remove difficult headset crown races
Zipp Tubeless Kit
$78.99
- Kit includes tape, 2 valves & 1 valve core wrench
Park Tool Hex Wrench (12mm)
$12.99
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park Tool Pump Rebuild Kit
$11.99
Park Tool is world-renowned for their bicycle industry tools, and their pumps are no exception. Keep yours up to speed and working smoothly with these rebuild kits. - 1096K: Contains one #1081 head as well as one #1075 plunger gasket for older PFP-2 and first generation PFP-4 floor pumps. Also compatible with second-generation PFP-4 floor pumps. - 1096X: Contains one #1096R head, one #1472 fitting, and one #1075 plunger gasket for second generation PFP-4 floor pumps. Also compatible with PFP-2 and first-generation PFP-4 floor pumps. - 1096Z: Contains one #1096R head, one #1472 fitting, and one #1087 plunger gasket for PFP-5 and PFP-7 floor pumps. Also compatible with PFP-3, PFP-6, and PFP-8 floor pumps.
Super B 3-Way Hex Y-Wrench
$11.99
Hex Key Wrench available in two sizes: 2/2.5/3mm and 4/5/6mm
Super B BB Tool - H2
$29.99
- BB wrench for use with Shimano Hollowtech II, Truvativ GXP, and FSA
RockShox Fork Service Kit
$22.99 - $56.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
Super B 21 Piece Classic Bike Tool Box Set
$199.99
Designed for riders and home mechanics, it is an ideal and durable tool set. 1-Freewheel turner 1-15mm pedal wrench 1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin 1-Spoke wrench for 0.127" nipple (black) 1-Spoke wrench for 0.130" nipple (green) 1-Spoke wrench for 0.136" nipple (red) 1-Mavic® spoke wrench (yellow) 2-Phillips 2, Slotted 6 screwdriver 3-Tire levers 9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25
Bontrager Pro Adjustable Wrench
$129.99
Product details - Professional-grade tool developed in partnership with Knipex and made to last - Parallel jaws are significantly better alternative to traditional adjustable wrenches - Can replace entire sets of imperial and metric wrenches - 10:1 gripping power ensures no slipping or rounding of fasteners - Capacity of up to 1-3/8" and 35mm fasteners - Light enough to travel with, durable enough for daily use
Park Tool Adjusting Cap Tool
$23.99
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
Park Tool Right Hand Bottom Bracket Tap
$571.99
Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.
Park Tool Ratcheting Metric Wrench
$12.99 - $18.49
World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
Park Tool Portable Workbench
$241.99
Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.
Park Tool DHD Precision Hex Drivers
$39.99 - $40.99
Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.
IceToolz Bearing Puller
$92.00
Bearing Puller for BB30, BB86, BB92 and Campagnolo Ultra-torque
Muc-Off Wet Lube
$13.99
- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain
Muc-Off C3 Wet Ceramic Lube
$14.99 - $23.99
- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable
RockShox Dust Seal Installation Tool
$27.00 - $34.00
- Used to install fork dust seals
Shimano S700 Oil for Alfine 11-Speed Hub
$199.99
One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub
Muc-Off Drivetrain Brush
$14.99
- Paintbrush-like shape for easier application and cleaning
Super B 6-inch Diagonal Cutters
$29.99
6" Diagonal cutting nippers
Super B Frame And Fork End Alignment Gauge Set
$149.99
- Determines if dropouts are aligned and parallel to avoid bent axles or skewers - Long handles and comfortable grips provide you superior leverage for straightening any issue
No Image
$54.99
With a simple twist to engage with Ninja Master series cage, this weatherproof tool box contains a 16-function metal mini-tool for basic repair and maintenance. Tools - 2 / 2.5 / 3 / 4 (L-type) / 5 / 8mm Allen wrenches - 6mm hex tool bit - T10 / T15 / T25 Torx wrenches - #2 Phillips / flat head screw drivers - 14G / 15G spoke wrenches - CrMo steel chain tool* and chain hook Compatibility - Ninja Master cage series - Ninja Universal Bracket Weight - 92 g / 3.24oz (Ninja T16+) - 40 g / 1.41oz (ToolBox) - Leverage added on 4 / 6mm Allen wrench - L-type wrench - Tool Material: Chrome vanadium steel - Tool Body Material: Carbon fiber injection *The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains.
SRAM Rise,Rail,Roam-Series Hub Service Tool
$15.99 - $34.99
- For removing/installing cartridge bearings in SRAM X0 hubs and Roam, Rail and Rise wheels
Page 1 of 9 Next page