Electronics

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

Genuine replacement parts Replacement charger for Hyena rear hub motor system. Product details - Includes charger body and power cable - Charging time of approximately 3 hours and 30 minutes - LED illuminates red when charging and green when complete

Works with iPhone 12 / 12 Pro The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that holds your phone securely while on the go. Its full angle adjustment allows viewing in portrait or landscape modes and an Integrated flip stand for post-ride hands-free viewing. Compatible with Lightning cable charging. * Remove iPhone from RideCase for wireless charging MATERIAL: Engineering grade polymer / Rubber / Machined aluminum SIZE: 15.4 x 7.9 x 1.49 cm / 6.1” x 3.1” x 0.59” WEIGHT: 39 g / 1.38 oz MOUNT: Included mounts for installation on handlebar, stem or stem cap ADDED FEATURES: Integrated flipstand for landscape or portrait viewing

Works with iPhone 12 Pro Max The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that holds your phone securely while on the go. Its full angle adjustment allows viewing in portrait or landscape modes and an Integrated flip stand for post-ride hands-free viewing. Compatible with Lightning cable charging. MATERIAL: Engineering grade polymer / Rubber / Machined aluminum SIZE: 16.9 x 8.6 x 1.49 cm / 6.7” x 3.4” x 0.59” WEIGHT: 46 g / 1.62 oz MOUNT: Included mounts for installation on handlebar, stem or stem cap ADDED FEATURES: Integrated flipstand for landscape or portrait viewing

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that holds your phone securely while on the go. Its full angle adjustment allows viewing in portrait or landscape modes and an Integrated flip stand for post-ride hands-free viewing. Compatible with Lightning cable charging. * Remove iPhone from RideCase for wireless charging MATERIAL: Engineering grade polymer / Rubber / Machined aluminum SIZE: 15.4 x 7.9 x 15 cm / 6.1” x 3.1” x 0.59” WEIGHT: 45 g / 1.59 oz MOUNT: Included mounts for installation on handlebar, stem or stem cap ADDED FEATURES: Integrated flipstand for landscape or portrait viewing

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that holds your phone securely while on the go. Its full angle adjustment allows viewing in portrait or landscape modes and an Integrated flip stand for post-ride hands-free viewing. Compatible with Lightning cable charging. * Remove iPhone from RideCase for wireless charging MATERIAL: Engineering grade polymer / Rubber / Machined aluminum SIZE: 15.4 x 7.9 x 15 cm / 6.1” x 3.1” x 0.59” WEIGHT: 44 g / 1.55 oz MOUNT: Included mounts for installation on handlebar, stem or stem cap ADDED FEATURES: Integrated flipstand for landscape or portrait viewing

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap - Size: 15.7 x 8.2 x 1.5cm / 6.2" x 3.2" x 0.59" - Weight: 35g / 1.23oz - Added Features: Integrated flipstand for landscape or portrait viewing angle adjustable rotates for landscape or portrait viewing

With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.

Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.

Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.

This premium heart rate strap transmits real-time heart rate data over ANT+ connectivity and BLUETOOTH Low Energy technology, giving you more options to train indoors, outdoors or even online. With it, you’ll be able to consistently receive accurate heart rate on your Garmin device, in online training apps such as Zwift or even the compatible fitness equipment in your favorite class at the gym. So however you like to train, you’ll get the accurate, real-time heart rate you need to take your performance to the next level. HRM-Dual features a soft strap that is comfortable and adjustable. Simply remove the heart rate module, and it’s washable, too. And don’t worry about running out of juice. The battery lasts for up to 3.5 years.

Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touchscreen-compatible pocket fits phones up to 6.5-inches (16.5cm) - Velcro attachment to top tube - Cargo capacity: 30.5 cu in (0.5L) - Dimensions: 16cm (l) x 8cm (w) x7cm (h) - Attachment: Hook and loop strap - Fiber content: 100% Polyester

Instant Bike Dashboard A smartphone bike mount is a worthy investment for any commuter, cyclist or weekend warrior who prefers his or her phone at the ready. With a sleek and unobtrusive design, this lightweight device, crafted of forged aluminum, is the ideal minimalist solution for your phone holder needs. - Construction: Forged aluminum with silicone stretch web. Aesthetic patent-pending design offers riders a low-profile mount. Additional support arm for forward-facing placement on any handlebar from 25 mm. - Compatibility: Silicone stretch web material securely fits any phone (standard or plus size) with any case. The textured platform provides plenty of grip, even in inclement weather. - Universal: When your smartphone isn't enough, change out the provided adapter mounting suited for your Garmin and Wahoo systems. An all-in-one solution within a single mount, each of your screens stay visible and secure, even on the roughest terrain. - Convenient: With your phone securely mounted to your handlebar, you can use navigation apps to reach your destination, and always stay connected. - Lightweight: Only 50g—no added weight to bike profile.

The Brompton Quad Lock® Phone Mount and Quad Lock® Universal Adaptor is the perfect kit and navigation companion for your Brompton bike. This complete kit provides a stable and safe way to mount your phone to your bike allowing for navigation and notifications to be clearly visible whilst on the move. Smart Ride Ready! This complete kit provides a stable and safe way to mount your phone to your bike allowing for navigation and notifications to be clearly visible whilst on the move. Mounted in the centre of the handlebars over the stem; the phone mount is Brompton designed and compatible with all current handlebar types. Made in robust nylon for a sleek black look which is unobtrusive on the bike. The Patented Dual-Stage Lock makes it quick & easy to attach / detach your device, whilst giving you the peace of mind to know your device is securely locked. At just 4.5mm thick, the Quad Lock® Universal Adaptor fits seamlessly onto the back of smartphones and cases. SPECIFICATION - Phone dimensions: 167mm x 76mm x 9mm on Mid or High handlebars, Low handlebars could accommodate larger mobile phones - Weight: 45 g - Features: Quad Lock® designed by Brompton – (designed to work with Brompton bike fold.), Dual-stage locking mechanism ensures phone is secure on bike, Strong, secure & lightweight mount - Compatibility: Not compatible with T Line bikes, Compatible with all Quad Lock® phone cases and universal adaptor (not included)

Ride smarter, train harder ANT+ compatible 2.4GHz digital wireless sensors for every bike, no matter the brand. Product details - ANT+ enabled devices work with a variety of Bontrager computers - Weight: 15g

Train smarter by connecting heart and smart phone or computer, all from a comfortable wearable with an easy-on washable strap. Key features: - Washable heart rate strap comfortably conforms to body - ANT+ 2.4 GHz and Bluetooth Smart wireless digital heart rate sensor - ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone - For use with all ANT+ and Bluetooth Smart wireless technology enabled devices - Includes washable softstrap, heart rate sensor, and CR2032 battery - Visit thisisant.com for a complete list of compatible devices - Visit bluetooth.com for a complete list of compatible devices - Not for underwater use

Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.

Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices

Pro Blendr is the ultimate computer integration system for clean and easy installation directly to Knock Block. - Start with a Knock Block equipped frame using the appropriate frame chip with display tabs, and finish with Pro Blendr Knock Block Computer Mount for secure mounting of computers behind the stem to keep your cockpit spotless. - In addition to the correct frame chip with display tabs, don't forget your Garmin or Wahoo Adapter Puck! These are sold separately so you can build the ultimate Blendr system that's right for you.

An elegant ANT+ cycling computer that’s simple to set up, intuitive to operate, and has a large, easy-to-read screen. Know your ride Change the way you ride with the RIDEtime Elite Cycling Computer. It's easy to pair with compatible ANT+ sensors for real-time speed, cadence, and power data so you can target more productive workouts and better recovery rides. Simple setup and an intuitive one-button interface get you riding faster, while features such as auto start/stop and auto light control help you take charge of your ride. Product details - 2” easy-to-read screen features a programmable backlight and customizable tri-field display - Features auto start/stop, auto clear, and auto light control with customizable hands-free scan modes - Tri-field display lets you see three functions at once (speed, cadence, heart rate, power) - Displays Trek Certified Service reminders based on your selected bicycle type - Displays distance (trip/total), time (clock, timer), and calories burned - Track your speed, heart rate, power, cadence (current, average, max) - Includes sleek out-front mount and is also Blendr compatible - Requires ANT+ compatible sensor such as DuoTrap S or Interchange Combo Sensor - Battery: CR2032 (Coin) - Weight: 40g

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration