Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Thule Frame Adapter
$59.95
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
Saris Bike Beam
$59.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris Wheel Straps (2-Pack)
$14.84
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Yakima 1-7/8-inch Trailer Coupler
$69.99
Coupler for 1-7/8 " balls for RACKandROLL trailer.
Yakima 2-inch Trailer Coupler
$69.99
Coupler for 2" balls for RACKandROLL trailer. Product Specs: - Weight: 4.12 lbs. - Dimensions: L 11.00 in x W 3.90 in x H 5.00 in - Limited One Year Warranty
Yakima 8 Hole Chainstraps
$11.99
Chainstraps for a multitude of rear of car bike racks.
Yakima 86
$19.99
End caps for 86" Cross Bars. Includes four end caps Please note these end caps are specific to the 86" cross bar.
Yakima Accessory Lock Housing
$34.99
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty
Yakima BaseClip
$59.99 - $74.99
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima Boa Wheelstrap
$13.99
Rear wheel strap for Boa bike mount. Includes one strap.
Yakima Bolt TopLoader
$154.99
A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty
Yakima Control Key Single SKS
$9.99
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Yakima CoreBar EndCaps
$6.99
Pair of EndCaps for Yakima CoreBar.
Yakima DeadLock
$84.99
Make pit stops on your bike excursion without worry of losing your rides. This security cable keeps your bikes and mast-style hitch mount locked to your vehicle. Cable stows in arm of rack when not in use. Compatible with the DoubleDown and BigHorn. - Lock your bikes and your hitch-mount bike rack to your vehicle - Compatible with the Yakima DoubleDown and BigHorn - Integrated cable lock secures outside bike to the mount - Cable stows in the arm of the rack when not in use - HitchLock secures the rack to your vehicle - Includes 2 SKS Lock Cores so your HitchLock and locking cable will use the same key Product Specs: - Weight: 0.50 lbs. - Dimensions: L 7.00 in x W 4.00 in x H 2.00 in - Limited Lifetime Warranty
Yakima EXO GearTotes
$84.99
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Yakima EXO WarriorWheels
$279.99
We made hauling from home to vehicle to anywhere a snap with the EXO WarriorWheels—wheels and a handle that connect to your EXO GearWarrior, even while it's still on your hitch. Simply snap it together and wheel your gear to wherever you're headed next, whether it's basecamp, the beach or the marina. - Connects to the EXO GearWarrior (or other Warrior baskets) in minutes without tools - All-terrain tires maneuver well over all types of surfaces and handle curbs and roots with ease - Roll up to 110 lbs. of gear to your camp or soccer practice - Large easy to grab handle is positioned to allow for maximum control when going downhill - 2 Year Warranty - Not intended to remain installed during vehicle transport Product Specs: - Weight: 18.50 lbs. - Dimensions: L 64.00 in x W 21.00 in x H 39.00 in - Limited Two Year Warranty
Yakima Fat Bike QR Locking Skewer
$64.99
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima Felt Pads (Sweetroll/ Hullhound)
$34.99
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Yakima FrontLoader Tensioning Handle
$9.99
Tensioning handle for FrontLoader universal bike mount. Includes one handle.
Yakima High Lift Jack Holder
$174.99
Be prepared with this heavy-duty bracket that keeps a high-lift jack accessible, and which conveniently mounts near the LockNLoad platform's perimeter. Easily installs in minutes and suitable for all common jacks. Add your own padlock to the integrated lock loop for greater security. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details - Securely carries 1 high-lift jack with a 50 mm steel standard bar up to 35 lbs. - Heavy-duty stamped steel construction, with a durable black-zinc coating. - Fits the LockNLoad platform rack and most other brands of T-slot equipped platforms. - Installs in minutes with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Add your own padlock to the integrated lock loop for greater security. - Limited Lifetime Warranty. Product Specs - Weight: 6.50 lbs - Dimensions: L 7.00in x W 3.00in x H 8.00in
Yakima Holdup Wheelstrap
$5.99
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima Joe Pro Safety/Wheel Straps
$9.99
Safety and wheel straps for Joe Pro series strap racks. Includes one each.
Yakima K323 Fitting Kit
$99.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima K328 Fitting Kit
$99.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima K450 Fitting Kit
$99.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima Ladder Roller
$139.99
Now racking up ladders, lumber and other lengthy gear supplies is a lot easier. Yakima’s new Ladder Roller attaches to our Truck Collection HD Bars and most any T-slot crossbar. - Steel brackets with durable black powder-coat finish for many years of use - Wide 24" (615mm) roller footprint for easy loading of a wide range of gear and equipment - Includes hardware for both our HD Bar and most T-slot crossbars - 75-lb. load capacity - Weight: 2.50 lbs - Dimensions: L 25.75in x W 4.75in x H 2.00in - Some assembly required, 5 minute install
Yakima Landing Pad 21 (Set of Four)
$259.99
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in
Yakima Light Mounting Bracket
$99.99
- Heavy-duty steel brackets that accommodate lights of virtually any size or shape. - Sold in set of 2
Yakima LightenUp Light Bracket Kit
$99.99
LightenUp your path-and easily secure your light bar or a pair of spotlights on your LockNLoad platform rack and Yakima T-slot crossbars. Configurable in 16 different orientations, this bracket provides peace of mind when you head out on nighttime adventures. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Configurable in 16 different arm-mounting orientations. - Supports up to an 18-lb. light bar or a pair of 9-lb. spotlights. - Max light bar length 52" long, max light bar depth 5.25" (including heat sink). - Heavy-duty steel construction, with a durable black-zinc coating. - Fits LockNLoad platform rack and perimeter rails, Yakima JetStream, FlushBar, RailBar, HD Bar T-slots, and most other T-slot equipped platforms and crossbars. - Also accommodates light bars that don't secure from the ends. - Holds lights with 6/8/10 mm hardware, using included torx head hardware for enhanced security. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 1.00 lbs - Dimensions: L 7.25in x W 2.00in x H 2.00in - Some assembly required, 30 minute install
Yakima LoadStop
$124.99
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
Page 1 of 3 Next page