Other

Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro backing.

RockShox Reverb replacement main piston and shaft to freshen up or repair your beloved Reverb. - Fits A1-A2 generation externally routed Reverb seatposts - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle. - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle.

The Top Cap Assembly on your Reverb contains a dust wiper and bushing. These parts need to be in good shape for the continued smooth operation of your Reverb. This top cap includes the cap, dust wiper, and bushing. - Fits A1 and A2 generation seatposts - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle

Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx

Shimano Rear Derailleur Pulley Assemblies

Shimano XT RD-M786-GS Rear Derailleur Inner Cage Plate - "B" fit for XTR RD-M986-GS, Deore RD-M615-GS, RD-M610-GS - OEM inner cage plate for XT RD-M786-GS, SLX RD-M675-GS

Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included

Need a spare Shimano cable adjuster assembly for your Dura-Ace R9100 rear derailleur? You've found it. Making sure this part is in working order can mean the difference between a two-second barrel twist to return your shifting to perfect, or getting out the multi-tool to readjust the cable again and again until it's close enough to get home. Your choice.

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Flat Mount Disc Caliper Bracket Bolts

If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Di2 STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace R9170 Di2 levers

The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in high-performance carbon fiber, in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance. - Diameter: 31.8 - EVO 70/110: Weight: 480g, Length: 360mm - Race: Weight: 480g, Length: 330mm

- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs

The Maxle Stealth offers a light, low profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure

Missile EVO clip-on carbon aero extensions for triathlon and time trial cyclists. - For "under bar" and "top bar" mount - Wide adjustability of armpads and extensions for optimal ergonomic and aerodynamic positions - Wide and 1cm thick microfiber arm pads - Clamp diameter: 31.8mm

Mounting hardware fits a variety of Cane Creek shocks.

Replacement pads for the F-40TT armrest.

Replacement springs for Cane Creek Helm suspension forks.

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

This is an FSA Self-Extracting Left Crank Arm Bolt for Mega Exo ATB Cranks - 30mm long - 14g - Designed to fit FSA ATB cranks only - Includes M18 bolt, M27 self-extracting cap and washers

- Made of 6061-T6 alloy - Extruded fastener parts - Internal Diameter: 19.6mm - With 26.0mm shims

Replacement pads for the F-40 armrest.

Profile Design's lightweight and sleek looking headset spacers are just what you need to make sure your bike functions and looks great. Available in 2, 3, 5, 10, and 20mm thicknesses.

Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.