Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Wahoo KICKR Desk
$429.99
The Wahoo KICKR Desk is the desk for multi-tasking. Use it as an indoor cycling desk with your KICKR or as a standing desk in your office. It's fully adjustable to allow you to easily optimize for and switch between the following: - Standing - Sitting upright - Riding with hands on hoods - Riding in the drops - Riding in aero bars The desk has built-in tablet and smartphone stands and built-in holes to connect all your computer technology. A steel frame makes it sturdy and a slip-resistant surface will keep everything in place - no matter how much you sweat. - With the push of a button, you can lower or raise the desk to sitting or standing position. - Easily move the desk out of your sweat zone. The desk can roll through most doorways. - Get maximum stability and sturdiness with the formed steel tube frame and baked-on polymer finish. - Prop up and secure your tablet or smartphone in the desk and see your cycling app while on your KICKR or screen while working. - Keep all your technology untangled and out of the way with cord holes integrated into the tablet/smartphone stand. - Rubber mat keeps everything in place on the desk, no matter how much you are sweating or how hard you are working.
Wahoo KICKR Trainer Floormat
$100.99
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.
Topeak Babyseat II Seat Pad
$49.99
Replace an old Topeak babyseat or just change color for a new look. - Replacement Pad Set only for Topeak Baby Seat II
Topeak Fixer 9
$32.99
Fast and easy attachment of Topeak Tablet DryBag.
Tacx BlackTrack
$299.00
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
Tacx Direct Drive Quick Release with Adapter Set
$84.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
Tacx E-Thru Trainer Axle
$49.99 - $64.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Tacx Neo Disc Extractor Tool
$29.99
With the disc extractor you can remove the aluminum disc on the side of your NEO Smart trainer in order to check the inside for residue and clean if necessary. This small tool is specially developed to open your NEO trainer yourself while staying within the terms of your warranty. The NEO disc extractor comes with three screws to fasten to your NEO. Use of this tool requires a 4mm Allen wrench, 5mm Allen wrench, and 24mm socket wrench.
Tacx Quick Release for Rear Wheel
$12.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
Tacx Roller Drive Belt
$15.99
Replacement roller belt for Tacs roller trainers.
Tacx Skyliner
$39.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
Tacx Sweat Cover
$39.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
Tacx Trainer Adapter for X-12 Axle
$64.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Saris 142x12 Trainer Thru Axle Adapter
$66.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Saris 148x12 Trainer Thru Axle Adapter
$63.99 $79.99 20% Off
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
Saris 20/24-inch Wheel Adapter
$93.99
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Saris Leveling Block
$31.99
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Saris TD1 Trainer Desk
$438.99
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
Saris Trainer Mat
$95.99 $119.99 20% Off
- Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise.
Quarq ShockWiz
$475.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Profile Design Threadless Size Converter
$29.99
Converts quill style forks to use threadless stems.
Problem Solvers MisMatch Adapters
$64.99
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
Park Tool Adjustable Shop Stool
$189.99
Park's Adjustable Shop Stool is ideal for quickly maneuvering into the best position when working on your bikes. It's adjustable from 17 to 22 inches high and features 5 smooth-rolling wheels for easy scooting. You'll also love the comfy padded seat with Park's colorful logo.
Park Tool Bottle Opener
$11.99
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
Park Tool Coffee Mug
$19.99
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!
Park Tool Digital Scale
$110.99
Park's Digital Scale accurately weighs bikes, frames and components. It measures in both pounds and kilograms to the tenth and includes a dual-position, silicon-coated hanging hook. Plus, its unique design allows it to be clamped solidly in a repair-stand and hung from a hook.
Park Tool Pint Glass
$11.49
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
Park Tool Pizza Tool
$25.99
Park's Pizza Tool is the perfect gift for the cyclist who has it all. It's a quality pizza cutter reminiscent of classic highwheelers that has a blade sharp enough to slice through the roughest terrain. This great tool also includes a display stand and gift box. Never use a run-of-the-mill pizza cutter again.
Park Tool Shop Stool
$198.99
Park's Shop Stool boasts a super-comfy padded seat, sturdy chrome-plated-steel legs and Park's colorful logo on top. The seat spins 360 degrees and is positioned at a height of 32 inches, which is perfect for wheel truing and all other work at a bench or counter.
Park Tool Stool Back Rest Kit
$58.99
The STL-3K is kit that will add a back rest to the STL-1.2 work stool (sold separately). The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STL-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K
Page 1 of 3 Next page