$139.99 - $149.99
The Wolf Tooth 110 BCD Asymmetric Chainrings are designed for use with Shimano GRX cranks. Chainrings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. - Compatible with Shimano GRX cranksets including RX600 and RX810 - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life
$114.99 - $164.99
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Compatible only with Hyperglide+ chains - For use with Shimano XTR M9100 series cranksets - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles
Page 1 of 1