Parts & Accessories

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

This Wheels Manufacturing Hollowtech II Crankarm Fixing Bolt For Late Model Shimano Road Cranks and LX keeps your Shimano crankset with 24mm spindle nice and snug. It is required to achieve perfect bottom bracket bearing preload.

• Shimano Ultegra FC-6800 Crank arm fixing bolt, Y1P417000 • Also fits most current Hollowtech II road cranksets, including Ultegra FC-R8000, 105 FC-R7000 and FC-5800, Tiagra FC-4700, Sora FC-R3000, Claris FC-R2000 and more

- Replacement bolt for DUB cranks - SRAM Model ID: FC-SPP-A0

- Replacement bolt for DUB cranks - SRAM Model ID: FC-SPP-A0

- Replacement bolt for DUB cranks - SRAM Model ID: FC-SPP-A0

- CRANK ARM BOLT KIT SELF-EXTRACTING M18/M30 DUB STEEL BLACK - SRAM Model ID: FC-SPP-A0

Race Face Crank Spiders allow a quick swap between chainring options on the Race Face CINCH crank system.

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

Genuine Brompton Left Hand Crank Arm. This crank arm is suitable for the modern Brompton Spider Crank, which has a replaceable chainring. The left-hand crank arm (non-drive side) has a built-in tab on the back of the crank to prevent the pedal from hitting and scratching the frame when folded. If your crank arm continually comes loose, then chances are the square taper has been damaged, and you need to replace the arm. - Genuine Brompton replacement part - Left-Hand Crank Arm (non-drive side) - Suitable for the 2013 onwards Spider crank - Crank length: 170mm - Bottom bracket fitting: JIS Square Taper - Pedal fitting: 9/16"