Other

Genuine replacement parts Get back on the road with a quality replacement hanger. Product details - Original equipment replacement rear derailleur hangers - Attachment hardware is sold separately Specs Mounting Location: Rear drive side Rear Dropout Dimension: 142x12mm Thru Axle Attachment: Thru axle nut

Original equipment replacement rear derailleur hangers Attachment hardware is sold separately

Genuine replacement parts Get your bike back on the trail with the derailleur hanger you need. Product details - Universal Derailleur Hanger - or UDH - offers greater derailleur protection - Designed to rotate rearward in event of an impact - Compatible with all drivetrains - 25mm washer is standard on hardtails - Included attachment hardware is reverse threaded

Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts

Flat mount rear adapter for a 160mm rotor

105 RD-R7000 tension and guide pulley set Sealed bushings Fits both SS and GS derailleurs

Shimano, 105 RD-5700 Pulley set, Y5XH98120

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Shimano Y8H298040 SM-BH59 Olive and connecting insert

Shimano part number: Y3E498010

Shimano Deore XT M8000 Rear Derailleur Bracket Axle Unit - "B" fit for SLX RD-M7000-11

Shimano Rear Derailleur Pulley Assemblies

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for Dura-Ace R9100 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control

Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

The new EC300 charging connector is designed specifically for Shimano's 12-speed Di2 road drivetrains. Connected via the rear derailleur, it can also charge Shimano FC-R9200-P / RC-R8100-P power meter crankset. • Charging connector for RD-R9250 / RD-R8150 • Also compatible with charging FC-R9200-P / FC-R8100-P power meter cranksets • 1.7 m cable length • Type-A USB connector

Mounting plate for installing EW90-A/B Di2 junction box on stem.

Genuine Shimano replacement derailleur pulleys Pulley Compatibility RD-RX400

Shimano part number: Y3HS98010

Shimano, SLX RD-M663-SGS Pulley set, Y5XE98030 Also fits Shimano 105 RD-5800 SS (11 speed, short cage) and RD-M7000 SGS (long cage/triple)

Guide and tension pulleys for SLX RD-M7000-GS/RD-U5000-SS

Genuine replacement part. This adapter charges some Shimano STePS batteries when the battery is NOT on the bike. COMPATIBILITY Used with these battery models: - BT-E6000 / E6001 / E6010 - EC-E6000 / E6002 / E8004

Shimano BR-M365 disc brake caliper Lock Ring & Washer.

- Adapter allowing the installation of an IS 6-bolts disc on a hub using the Shimano Center Lock system - Compatible only with rotors that feature a steel spider (i.e. a steel mounting point, Not compatible with SM-RT76 / SM-RT86)

ST-6800 Bracket Covers (Pair) Black Y00E98080

This is a Bleed Port Screw & O-Ring it for Shimano hydraulic brake levers. ST-R9120 Features: - Replaces lost or broken bleed port screw & o-ring - Take care when installing. Do not overtighten. It is very easy to strip - 105 and Dura-Ace/Ultegra screws can generally be used interchangeably; however, the hex key size required may be different Compatibility: - 105: 105 ST-R7020, 105 ST-R7025, Tiagra ST-4725, Tiagra ST-4720, GRX Di2 ST-RX815, GRX ST-RX600, GRX ST-RX400 - Dura-Ace/Ultegra: Dura-Ace ST-R9120/Ultegra ST-R8020 - Dura-Ace/Ultegra Di2: Dura-Ace ST-R9270/Ultegra ST-R8170 - SLX/Deore: SLX BL-M666, Deore BL-M596 ("B" fit for XT BL-M8000 and BL-M785) - XT/SLX: XT BL-M8000, SLX BL-M7000 ("B" fit for XTR BL-M9020, XT BL-M785)

Genuine Shimano replacement derailleur pulleys Pulley Compatibility RD-RX817

- Genuine Shimano replacement derailleur pulleys - Tourney : Shimano quality at an affordable price - 6/7/8 speed compatible

Shimano Rear Derailleur Pulley Assemblies

• Ultegra RD-R8000 tension and guide pulley set • Sealed ball bearings • Fits Ultegra RD-R8000 and RD-R8050 Di2 in both GS and SS cage length as well as Ultegra RX RD-RX800 and RD-RX805 Di2 derailleurs • Also fits 1 x 11 GRX RD-RX812

Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only

Replacement name plates for STI levers for Shimano Ultegra ST-6800 11-speed shifters. Original Shimano parts for optimum performance and maximum safety and longevity. Y00E98020

Shimano replacement name plate with fixing screw for Ultegra ST-R8000 Dual Control Lever. Y0DK98030

When you need a lot of AXS batteries charged in a hurry, the Four Battery Charger is the tool you want. This USB-C powered charger will fill four batteries in the same time as a single charger, with charge time even faster if only one or two batteries are being charged. The fast charging feature gets the batteries to 75% extra quick, so if you’re rushing out the door, we have you covered. - USB-C interface for improved conductivity and broad compatibility - 60 minute charge time for four batteries, faster for one or two - LED lights indicate charge status and power draw - Benchtop or wall mountable design - SRAM Model ID: EP-EAC-BC4P-A1

- Rear Derailleur Apex1/NX 11 Speed Pulley Kit - 11.7518.072.000 - SRAM Model ID: RD-SPP-A0

- REAR DERAILLEUR PULLEY KIT FORCE XPLR AXS STEEL BEARING (INCLUDES 12T UPPER AND 12T LOWER PULLEYS, 12.5MM AND 12.9MM STEEL PULLEY SCREWS) - SRAM Model ID: RD-SPP-A0

Force eTap AXS Rear Derailleur Pulley Kit - Steel bearings - 12-Speed

SRAM, Force22, Derailleur pulleys, Force22, 11.7518.026.000

REAR DERAILLEUR PULLEY KIT GX 2X11

GX Eagle Rear Derailleur Pulley Kit

Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm

Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too.

- SRAM, Road pulleys, 11.7515.060.000

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

SRAM, GX/X7 Type 2, Derailleur pulleys, 11.7518.018.001

Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1

Replacement hoods for SRAM hydraulic shifter/brake levers.

Fork seal/wiper service kits to protect fork internals and sliders and improve overall fork performance. Dust Seal including 10mm Foam Ring.

- Pike and Pike DJ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead

RockShox 32mm Seal Kit

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-Spec EV (M9100, M8100, M7100) brake mounts. - Does not contain remote body.

This pair of drop outs attach the Divide rack frames to your bike. The asymmetrical design allows for eyelet mounting or attachment to Robert Axle Project thru axles. - Made from 6061 aluminum and powder coated for durability - Adjustable height - Fits front and rear installations - Fits on all Divide and Divide Fat models - Includes hardware